Annicom Axio Logo  
    +44(0)1420487788  
 
home | about us | products | datasheets | account
 
   
datasheetdetails
 <<  |  <  |   AX-EPC - Analogue to Pneumatic Converter
AX-EPC / Single Valve Analogue to Pneumatic Converter 0 to 15 psig POA Qty
AX-EPC-G / Single Valve Analogue to Pneumatic Converter + Gauge 0 to 15psig POA Qty
AX-EPC2 / Dual Valve Analogue to Pneumatic Converter 0 to 15 psig POA Qty
AX-EPC2-G / Dual Valve Analogue to Pneumatic Converter + Gauge 0 to 15 psig POA Qty
AX-EPC2-LG / Dual Valve Analogue to Pneumatic Converter + Gauge 0-30psig POA Qty
AX-EPC2-FS / Dual Valve Analogue to Pneumatic Converter - Failsafe 0 to 15 psig POA Qty
 <<  |  <  | OVERVIEW | SPECIFICATION | DATASHEETS        

The AX-EPC range is an analogue to pneumatic convertor which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. Output pressure ranges are jumper shunt selectable for 0 to 10, 0 to 15 and 0 to 20 psig, and adjustable in all ranges. A 0-5 VDC feedback signal indicating the resultant branch line pressure, is also provided. AX-EPC’s are designed with electrical terminals on one end and pneumatic connections on the other, allowing for maximum convenience in wiring and tubing installation when panel mounted.
Product Features
• Field Selectable Offset and Span
• Field Adjustable Pressure Output Ranges
• Field Selectable Analogue Input Ranges
• Closed Loop control
• Analogue feedback on branch pressure
• Not position sensitive
• Manual / auto toggle switch reports override status to controller
• Pneumatic valve & Damper actuator control
• Fan Vane control
• DDC control
• Pilot Positioner control
• Mixing & VAV Boxes

Power Supply
24Vdc +10/-5%

24Vac +/-10% 50/60Hz
Current
180mA max (200mA on AX-EPC2-FS)
Inputs
0-5Vdc, 0-10Vdc, 0-15Vdc, 0-20mA @250Ohms
Feedback Output Signal
0-5Vdc
Air Supply
Maximum 25psig min 18psig (main pressure must be 2psig above max o/p)
Air Supply Consumption
15psig (750scim) supply valve
AX-EPC2-LG
30psig (1400 scim) supply valve
Output Pressure Range
0-10, 0-15, 0-20 psig jumper selectable
Manual Auto Override
Manual - output can be varied Auto - output controlled by input
Manual Auto Override Feedback
Dry Contact 24Vac/dc 1A Max N.O.
Accuracy
1% @ room temperature
Pneumatic Capacity
Supply Valves @ 25psig
Filter
80-100 integral-in-barb micron filter (except-LG with a 5 micron filter)
Electrical Terminals
14 Gauge wire plug in blocks
Pneumatic Fittings
Brass barbed 1/8” FNPT
Pneumatic Tubing Size
1/4” OD 1/8” ID nominal
Ambient Temp
0-50oC Humidity
Dimensions
85(L) x 85(W) x 45(H) mm (-G = 82mm high)
Weight
single valve 142gms (pcb only)

dual valve 196gms (pcb only)

gauge add 65gms
Country of Origin
U.S.A.

AX-EPC.pdf / Analogue to Pneumatic Converter